Drain Saddle Clamps directly plumb the waste water line from RO systems to a sinks drain pipe.
Two Configurations Available
- 1/4" Push Connect
- 3/8" Push Connect
Specifications
- 1/4" hole needed for 1/4" drain saddle clamp
- 3/8" hole needed for 3/8" drain saddle clamp
- Max pipe diameter 1.5" Sch 40 PVC or Sch. 80 PVC
Installation Instructions
- Drill appropieate size hole in sink drain pipe close to the sink
- Stick included gasket around hole (remove die cut circle from center if needed
- Position clamp on pipe and fasten with included screws
- Push in tubing and check for leaks
