The Exo Terra Turtle Cliff is a waterfall, basking area and filter in one. Its state-of-the-art filtering system instantly transforms an aquatic terrarium setup into the ideal habitat while providing turtles and other semi-aquatic terrarium animals with the ideal basking or terrestrial area. The hidden filter provides clear, healthy water while the waterfall features creates the necessary water circulation and aeration, and its natural rock texture and colour allows it to integrate easily into any aquatic terrarium setup.
The Exo Terra Turtle Cliff is equiped with a Repti Clean Terrarium Filter, an optimal water filtration system with large filter volume and effective flow control. The 3-stage filtration system allows alternate replacement for continuous biological filter activity, guaranteeing optimal mechanical, chemical and biological filtration. Addition filter material can be added to the chambers for increased filter performance. Aquatic heaters can also be concealed within the Exo Terra Turtle Cliff. The flat back and side can be easily positioned in the back corners of the Exo Terra Turtle Terrarium.
- Waterfall, basking area and filter in one
- Integrates easily into any aquatic terrarium setup
- Optimal hidden water filtration system
- Provides the necessary water circulation and aeration
- Ideal basking or terrestrial area for semi-aquatic animals
- 14.5” x 9” x 9.2”
- 120 volts
Installation: Insert filter into cavity in bottom half of Turtle Cliff. Press down firmly on the filter to ensure the suction cups are fully securing it place. If additional filtration is required, extra filter material can be placed in the cavity 2. Position top half of Turtle Cliff onto bottom half. Ensure that filter’s water outlet spout/tube is aligned with outlet hole in Turtle Cliff. 3. Arrange Turtle Cliff in desired location in terrarium. Turtle Cliff should be placed on a flat, level surface. Ensure that the water suction holes on the base of the Turtle Cliff are not blocked or obstructed. 4. Connect the power cord to the electrical outlet. If the unit does not start immediately, verify that the water level is sufficient to immerse the filter’s water outlet spout/tube during operation.
